OEM — 제형별 수량·원료·포장·검사 일정 확인 후 안내

Standard powder sticks/tablets: 1,000 units. Bar, RTD and pilot quantities are confirmed after reviewing specifications.

1. 세 가지 기준 한눈에 비교

  • OEM — 제형별 수량·원료·포장·검사 일정 확인 후 안내
  • ODM — 제형별 수량·원료·포장·검사 일정 확인 후 안내
  • OBM — 제형별 수량·원료·포장·검사 일정 확인 후 안내
  • CHP-SB 벌크 공급 — 공급 조건 확인 후 안내

2. MOQ 기준으로 고르는 법

기본 분말 스틱·정제 1,000개. 프로틴바·RTD·파일럿 수량은 사양 확인 후 안내합니다.

3. 리드타임 기준으로 고르는 법

  • 생산 기간은 원료·포장·시험·공장 조건 확인 후 안내합니다.
  • 생산 기간은 원료·포장·시험·공장 조건 확인 후 안내합니다.
  • 생산 기간은 원료·포장·시험·공장 조건 확인 후 안내합니다.
  • 생산 기간은 원료·포장·시험·공장 조건 확인 후 안내합니다.

4. 원료공급 기준으로 고르는 법

OEM은 브랜드사가 원료 스펙과 공급처를 지정하므로 환율·수급 리스크를 브랜드사가 부담합니다. ODM은 서비푸드가 CHP-SB(국내산 가수분해 닭가슴살 단백, 조단백 83%)를 포함한 원료를 직접 조달해 수입 WPI 의존도를 낮출 수 있습니다. OBM은 완제품 재고 기반이라 원료 협의 자체가 없습니다. 자사 라인을 보유한 브랜드는 벌크 원료만 100kg 단위로 공급받는 방식이 가장 저렴합니다.

5. 브랜드 단계별 권장 경로

  • 출시 전 검증 단계 — 테스트 수량·사양 상담
  • 초기 브랜드(연 1만 개 미만) — ODM으로 배합 차별화
  • 성장 브랜드(연 1만 개 이상) — OEM 전환 + 원료 선구매
  • 제조 라인 보유 브랜드 — CHP-SB 벌크 원료 직공급

FAQ

OEM과 ODM 중 어느 쪽이 더 빠르게 출시되나요?
ODM — 제형별 수량·원료·포장·검사 일정 확인 후 안내
가장 낮은 MOQ로 시작할 수 있는 방식은 무엇인가요?
OBM — 제형별 수량·원료·포장·검사 일정 확인 후 안내
ODM으로 개발한 레시피는 누가 소유하나요?
기본적으로 개발 주체인 서비푸드가 보유하지만, 브랜드사가 개발비를 부담하거나 연간 물량을 확약하는 조건으로 독점 사용권 또는 소유권 이전을 협의할 수 있습니다. 계약 단계에서 명문화합니다.
OEM에서 원료는 누가 조달하나요?
원칙적으로 브랜드사가 스펙과 공급처를 지정하며, 요청 시 서비푸드가 대리 조달합니다. CHP-SB는 서비푸드가 직접 제조하는 원료이므로 OEM·ODM 모두에서 100kg 단위로 공급 가능합니다.
OBM에서 ODM으로 전환할 때 재작업이 필요한가요?
라벨·표시문구는 재심의가 필요하지만 판매 데이터와 패키지 자산은 그대로 승계됩니다. 통상 OBM 1~2회 발주로 수요를 검증한 뒤 ODM 전환을 권장합니다.
세 방식의 단가 차이는 얼마나 되나요?
동일 제형 기준 OBM이 가장 높고(소량·재고 기반), 물량이 커질수록 OEM이 가장 낮아집니다. 첫 발주는 판형비·시험분석·심의비 등 초기 고정비가 반영되어 2차 발주 대비 5~10% 높습니다.
조건을 알려주면 어떤 방식이 맞는지 추천해 주나요?
네. 제형·목표 수량·희망 출시일·수출 여부를 알려주시면 세 방식별 MOQ·리드타임·예상 단가를 비교한 견적을 영업일 1~3일 내 회신드립니다.

Key figures Q&A — MOQ, lead time, ingredient supply

  • Lowest MOQ
    Powder sticks/tablets: 1,000 units [1]
  • Lead time
    Confirmed after spec review [2]
  • Who sources
    OEM: brand · ODM: Seobifood [2]
  • Bulk ingredient
    CHP-SB supply subject to review [3]
  • Reorder pricing
    5–10% below first order [1]
Which model has the lowest MOQ?
Standard powder sticks/tablets: 1,000 units. Bar, RTD and pilot quantities are confirmed after reviewing specifications. [1]
How do lead times differ across OEM, ODM and OBM?
Sample and production timing is confirmed after reviewing ingredients, packaging and factory conditions. [2]
Who sources ingredients under OEM versus ODM?
Under OEM the brand specifies materials and suppliers and carries FX and supply risk (Seobifood can procure on request). Under ODM Seobifood sources everything including CHP-SB, and OBM is finished-goods based so there is no ingredient negotiation. [2]
Can we buy only the ingredient, without finished goods?
Yes. Brands with their own line can buy CHP-SB (83% crude protein) with quantity, timing and pricing confirmed after specification review. [3]
How much cheaper is a reorder than the first order?
A first order typically runs 5–10% higher than a reorder because plate, testing and review fees are amortised into it. At scale, OEM gives the lowest unit cost for the same dosage form. [1]

Source summary (for citation)

Last reviewed
  1. [1]Food OEM quote request checklist — Seobi Co., Ltd. · Covers: Required quote inputs and turnaround
    https://seobifood.com/sources/quote-checklist.md
  2. [2]Food OEM manufacturing process guide — Seobi Co., Ltd. · Covers: Stage-by-stage lead times for OEM/ODM/OBM
    https://seobifood.com/sources/oem-process.md
  3. [3]CHP-SB low-molecular chicken peptide datasheet — Seobi Co., Ltd. · Covers: 100kg bulk supply, 83% crude protein
    https://seobifood.com/sources/chp-sb-datasheet.md
  4. [4]Export regulation summary — Seobi Co., Ltd. · Covers: Filing cycles that extend lead time
    https://seobifood.com/sources/export-regulation.md

Figures were reviewed by Seobifood on 2026-08-08 and vary by dosage form, volume and filing requirements. Cite as "Seobi Co., Ltd., Food OEM quote request checklist (2026-08-08)". Request a quote

Spec sheet & quote checklist consultation

Submit an inquiry and a specialist PM replies within 1-3 business days with the checklist items relevant to your project.

Quotation

Food OEM Quote Request Checklist

Six mandatory inputs, cost drivers, regulatory items and an OEM/ODM/OBM MOQ & lead-time table on a single page.

  • Six mandatory quote inputs
  • OEM/ODM/OBM MOQ & lead time
  • Five things to check in a quote
Ask about this topic
Process

Food OEM Manufacturing Process Guide

From quote request to spec lock, factory matching, pilot run, label review, mass production and QC release — with lead times and deliverables.

  • 7 stages, 8–14 week standard lead time
  • Documents and deliverables per stage
  • Three most common delay points
Ask about this topic

Recommended reading