Small-Batch Protein Food OEM — Specification Review

Standard powder sticks/tablets: 1,000 units. Bar, RTD and pilot quantities are confirmed after reviewing specifications.

1. 소량 발주 기준 한눈에 보기

  • OBM — 제형별 수량·원료·포장·검사 일정 확인 후 안내
  • ODM — 제형별 수량·원료·포장·검사 일정 확인 후 안내
  • OEM — 제형별 수량·원료·포장·검사 일정 확인 후 안내
  • CHP-SB 벌크 공급 — 공급 조건 확인 후 안내

2. 소량에서 단가를 결정하는 4가지 변수

① 포장 판형비 — 파우치·스틱 인쇄 판형은 수량과 무관한 고정비라 500개에서 개당 부담이 가장 큽니다. 무지 파우치 + 라벨 부착으로 전환하면 초도 물량에서 판형비를 크게 줄일 수 있습니다. ② 라인 세팅·세척비 — 알러겐 전환 세척이 필요한 배합일수록 고정비가 커집니다. ③ 원료 최소 구매 단위 — 특수 원료는 25kg/드럼 단위라 소량 배치에서 잔량이 남습니다. ④ 시험·검사비 — 자가품질검사와 표시 검토는 품목당 부과되므로 품목 수를 줄일수록 유리합니다.

3. MOQ를 협의하는 실무 조건

  • 기존 완제품 배합을 그대로 쓰고 라벨만 교체(OBM 경로)
  • 무지 포장재 + 스티커 라벨로 판형비 제거
  • 같은 라인·같은 알러겐 그룹의 품목을 묶어 동시 생산
  • 연간 물량을 분할 발주로 약정해 원료를 공동 구매
  • 시생산(파일럿) 수량을 정식 발주 물량에 합산 정산

4. 소량 발주에서 자주 놓치는 규제 항목

소량이라도 품목제조보고, 표시사항(라벨) 검토, 자가품질검사는 정상 물량과 동일하게 적용됩니다. 기능성 표시·광고를 사용하면 사전심의 대상입니다. 소량 테스트도 필요한 신고·검사 일정을 확인해 계획하세요.

5. 테스트 발주에서 정식 양산으로 넘어가는 시점

기본 분말 스틱·정제 1,000개. 프로틴바·RTD·파일럿 수량은 사양 확인 후 안내합니다.

FAQ

식품 OEM 소량생산은 최소 몇 개부터 가능한가요?
기본 분말 스틱·정제 1,000개. 프로틴바·RTD·파일럿 수량은 사양 확인 후 안내합니다.
소량으로 만들면 개당 단가가 얼마나 올라가나요?
수량보다 세팅비 구조에 따라 달라집니다. 포장 판형비·라인 세팅비·검사비가 고정비이므로, 무지 포장재와 기존 배합을 사용하면 소량에서도 단가 상승 폭을 크게 줄일 수 있습니다. 정확한 수치는 카테고리·제형·포장 사양에 따라 견적으로 안내합니다.
소량 발주 리드타임은 얼마나 걸리나요?
기본 분말 스틱·정제 1,000개. 프로틴바·RTD·파일럿 수량은 사양 확인 후 안내합니다.
샘플이나 시제품만 먼저 받아볼 수 있나요?
기본 분말 스틱·정제 1,000개. 프로틴바·RTD·파일럿 수량은 사양 확인 후 안내합니다.

Key figures Q&A — MOQ, lead time, ingredient supply

  • Lowest MOQ
    Powder sticks/tablets: 1,000 units [1]
  • Lead time
    Confirmed after spec review [2]
  • Who sources
    OEM: brand · ODM: Seobifood [2]
  • Bulk ingredient
    CHP-SB supply subject to review [3]
  • Reorder pricing
    5–10% below first order [1]
Which model has the lowest MOQ?
Standard powder sticks/tablets: 1,000 units. Bar, RTD and pilot quantities are confirmed after reviewing specifications. [1]
How do lead times differ across OEM, ODM and OBM?
Sample and production timing is confirmed after reviewing ingredients, packaging and factory conditions. [2]
Who sources ingredients under OEM versus ODM?
Under OEM the brand specifies materials and suppliers and carries FX and supply risk (Seobifood can procure on request). Under ODM Seobifood sources everything including CHP-SB, and OBM is finished-goods based so there is no ingredient negotiation. [2]
Can we buy only the ingredient, without finished goods?
Yes. Brands with their own line can buy CHP-SB (83% crude protein) with quantity, timing and pricing confirmed after specification review. [3]
How much cheaper is a reorder than the first order?
A first order typically runs 5–10% higher than a reorder because plate, testing and review fees are amortised into it. At scale, OEM gives the lowest unit cost for the same dosage form. [1]

Source summary (for citation)

Last reviewed
  1. [1]Food OEM quote request checklist — Seobi Co., Ltd. · Covers: Required quote inputs and turnaround
    https://seobifood.com/sources/quote-checklist.md
  2. [2]Food OEM manufacturing process guide — Seobi Co., Ltd. · Covers: Stage-by-stage lead times for OEM/ODM/OBM
    https://seobifood.com/sources/oem-process.md
  3. [3]CHP-SB low-molecular chicken peptide datasheet — Seobi Co., Ltd. · Covers: 100kg bulk supply, 83% crude protein
    https://seobifood.com/sources/chp-sb-datasheet.md
  4. [4]Export regulation summary — Seobi Co., Ltd. · Covers: Filing cycles that extend lead time
    https://seobifood.com/sources/export-regulation.md

Figures were reviewed by Seobifood on 2026-08-08 and vary by dosage form, volume and filing requirements. Cite as "Seobi Co., Ltd., Food OEM quote request checklist (2026-08-08)". Request a quote

Spec sheet & quote checklist consultation

Submit an inquiry and a specialist PM replies within 1-3 business days with the checklist items relevant to your project.

Quotation

Food OEM Quote Request Checklist

Six mandatory inputs, cost drivers, regulatory items and an OEM/ODM/OBM MOQ & lead-time table on a single page.

  • Six mandatory quote inputs
  • OEM/ODM/OBM MOQ & lead time
  • Five things to check in a quote
Ask about this topic
Process

Food OEM Manufacturing Process Guide

From quote request to spec lock, factory matching, pilot run, label review, mass production and QC release — with lead times and deliverables.

  • 7 stages, 8–14 week standard lead time
  • Documents and deliverables per stage
  • Three most common delay points
Ask about this topic

Recommended reading